Wireless, intrinsically safe, automatic vibration analysis that can scale to match the needs of your facility. The EAGLE system pairs up to 150 wireless tri-axial vibration sensors to a single gateway router that allows you to monitor machines that are far away, in confined spaces, or in hazardous locations, all without laying cable.

Reduce installation costs by eliminating the need for wires
Ideal for monitoring machines in confined, dangerous, or hard-to-reach areas
Simple maintenance: battery lasts for five years under rated operating conditions
No interference with other wireless networks
Monitoring of machines starting at 100RPM

Ease of deployment

It is now possible to improve the reliability of inaccessible, mobile or isolated machines of the plant, meanwhile reducing installation costs in harsh environments or remote locations. EAGLE is a self-powered wireless sensor. Absolutely no cable is needed. The wireless gateway can be installed up to a hundred meters from the sensor, and the range can be extended using wireless Expanders. The wireless transmission of vibration data to the analysis software is achieved with high reliability: The wireless communication is done through a smart process, setting-up completely automatically and self-adjusting over the time if needed. EAGLE installation is quick and easy.

Ease of maintenance

EAGLE performance is optimized for long term service with a low cost of maintenance: The EAGLE battery offers up to 5 years availability under rated operating conditions of one full diagnostic measurement set per day, and this with no external source of power supply or maintenance operations. For critical machinery, using an optimum monitoring strategy with frequent alarm monitoring and storage of high quality data (Overals, Time waveform, FFT, envelope), EAGLE still offers a 2-year lifetime. Moreover, the inexpensive standard battery is interchangeable on-site by the end user, making its replacement easy to achieve.

Wireless monitoring system

ONEPROD EAGLE is a wireless monitoring system for critical rotating machinery. It measures automatically vibration in three directions as well as the bearing temperature. Its measurement performances make of EAGLE the best wireless diagnostic solution available on the vibration analysis market.

4 sensors in one wireless unit

3 vibration axes
bearing Temperature

Monitoring of alarms

short periodicity for monitoring vibration velocity, acceleration and temperature
storage of raw data at a larger periodicity and on any alarm occurrence
optimization of battery lifetime

Operating conditions

measurements are done in specific conditions (speed, power…)
easy trending and diagnostics
optimization of battery lifetime

Made for diagnostic

analysis of phenomenon up to 20kHz
dynamic range of +/- 50g
one or several time waveforms and FFT per point, including envelope FFT
up 16,384 samples per time waveform (0.3s with Fmax = 20kHz, 0.6s with Fmax = 10kHz…)

Communication capabilities

automatic and extended communication capabilities
smart wireless protocol: no setup needed
up to 100 meters between the gateway and the first node
up to 7 expanders between the sensor and the gateway

Harsh environments

EAGLE solution has been designed to meet the industry requirements. Both the EAGLE sensor and the Expander are certified for use in explosive area Zone 0 (Class I, Div I). The stainless steel body with very low thermal expansion makes it safe to use even in the harshest settings. IP67, EAGLE is also resistant against corrosive environments. Wireless and automatic, EAGLE eliminates the need for cables and manual inspections where conditions are not conducive for such operations.

Managing machines with variable conditions

ONEPROD has invested all its experience in condition monitoring in EAGLE, enabling the wireless monitoring of the most complex machines. The operating conditions (speed, power, pressure, or other process data) of the machines are taken into account and transmitted automatically. Diagnostics are even more pertinent and analyses more effective:

measurements can be easily translated into trends and compared over time for each operating condition
no false alarms: thresholds are adjusted for each operating condition, providing accurate fault detection capabilities on complex machinery

Monitoring of critical machinery

EAGLE is the wireless system offering the best performance on the vibration analysis market. Its measurements quality makes it suitable for monitoring any rotating machine, from 100 rpm upwards. EAGLE is not just a transducer. This smart wireless unit embeds signal processing: Advanced indicators, as well as envelope FFT are calculated locally, thus enabling measurements to be recorded if a vibration or bearing temperature alarm occurs. The data storage frequency is adjusted automatically according to the machine condition. Data is available for detailed analysis using ONEPROD NEST predictive maintenance platform, providing unique tools such as the ONEPROD Shock Finder™ filter. Maintenance operations can be scheduled before any failure occurs.

Eagle