Two transmitters with visible red laser line

The FIXTURLASER PAT comes with two-line laser transmitters, each equipt with two spring-load guides that fit into the pulley grooves. The use of two laser transmitters with integrate targets makes it very easy to find out what kind of alignment that is required. Parallel offset, angular error and twist is instantly visible to the operator. Within a few minutes, the operator can determine if the machine requires alignment or not.

 
FixturLaser PAT
 
Mounting of the transmitters

The FIXTURLASER PAT units are very easily mounting on the pulleys. The spring action probe finds the center of the belt groove. The industrial built-in magnets snap the units to the pulley in a perfect fit. The FIXTURLASER PAT is equipping with various sized removable guides to fit standard sheave sizes A-E (6 mm – 40 mm). Additional guides for alignment of timing belts are available as accessories.

 
 

The alignment process with the FIXTURLASER PAT

The visible red laser line makes it easy to determine the position of your belt driven machines.
The alignment process is as easy as the mounting. Just turn on the lasers and look at the opposite mounted unit. The laser draws a line on the target label as in the illustration to the left. If necessary, adjust your machine position until the laser lines are aligned with the centre mark on both units.
 

Thermal Imaging Camera

FixturLaser PAT
Scroll to top